MIBs Depot

A3COM-HUAWEI-DHCPRELAY-MIB

Registered at
1.3.6.1.4.1.43.45.1.10.2.58
Last updated
2005-06-08 00:00
Organization
Huawei 3Com Technologies Co.,Ltd.
Revisions
2005-06-08 00:00
Namespace
3com
Source file
A3COM-HUAWEI-DHCPRELAY-MIB
Digest
sha256:c0c3a1d634edd6ba41109638f891a7c6beffb422750ab38039b765116df5a5d8

Description

HUAWEI-3COM DHCPR MIB

Contact

Platform Team Huawei 3Com Technologies Co.,Ltd. Hai-Dian District Beijing P.R. China http://www.huawei-3com.com Zip: 100085

Imports

FromSymbols
A3COM-HUAWEI-OID-MIBh3cCommon
IF-MIBifIndex
INET-ADDRESS-MIBInetAddress, InetAddressType
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIInteger32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

A3COM-HUAWEI-DHCPRELAY-MIB
A3COM-HUAWEI-OID-MIB
IANAifType-MIB
IF-MIB
INET-ADDRESS-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
h3cDHCPRMibObject
OBJECT-IDENTITY
1.3.6.1.4.1.43.45.1.10.2.58.1
h3cDHCPRIfSelectTable
OBJECT-TYPE
A table for configuring relay mode for interfaces.
1.3.6.1.4.1.43.45.1.10.2.58.1.1not-accessiblecurrent
h3cDHCPRIfSelectEntry
OBJECT-TYPE
An entry for configuring relay mode for an interface.
1.3.6.1.4.1.43.45.1.10.2.58.1.1.1not-accessiblecurrent
h3cDHCPRIfSelectRelayMode
OBJECT-TYPE
If the value is on, the DHCP relay function would be enabled on this interface.
1.3.6.1.4.1.43.45.1.10.2.58.1.1.1.1INTEGER {on(1), off(2)}read-writecurrent
h3cDHCPRIpToGroupTable
OBJECT-TYPE
A table for configuring ip addresses for DHCP server groups.
1.3.6.1.4.1.43.45.1.10.2.58.1.2not-accessiblecurrent
h3cDHCPRIpToGroupEntry
OBJECT-TYPE
An entry for configuring ip addresses for a DHCP server group.
1.3.6.1.4.1.43.45.1.10.2.58.1.2.1not-accessiblecurrent
h3cDHCPRIpToGroupGroupId
OBJECT-TYPE
Group identifier of DHCP server group.
1.3.6.1.4.1.43.45.1.10.2.58.1.2.1.1Integer32 (0..19)not-accessiblecurrent
h3cDHCPRIpToGroupServerIpType
OBJECT-TYPE
Ip address type of DHCP server.
1.3.6.1.4.1.43.45.1.10.2.58.1.2.1.2InetAddressTypenot-accessiblecurrent
h3cDHCPRIpToGroupServerIp
OBJECT-TYPE
Ip address of DHCP server.
1.3.6.1.4.1.43.45.1.10.2.58.1.2.1.3InetAddress (SIZE(1..64))not-accessiblecurrent
h3cDHCPRIpToGroupRowStatus
OBJECT-TYPE
Operation status of this table entry. Three actions are used: active, createAndGo, destroy.
1.3.6.1.4.1.43.45.1.10.2.58.1.2.1.4RowStatusread-createcurrent
h3cDHCPRIfToGroupTable
OBJECT-TYPE
A table for configuring DHCP server groups for interfaces.
1.3.6.1.4.1.43.45.1.10.2.58.1.3not-accessiblecurrent
h3cDHCPRIfToGroupEntry
OBJECT-TYPE
An entry for configuring DHCP server group for an interface.
1.3.6.1.4.1.43.45.1.10.2.58.1.3.1not-accessiblecurrent
h3cDHCPRIfToGroupGroupId
OBJECT-TYPE
The DHCP server group for this interface.
1.3.6.1.4.1.43.45.1.10.2.58.1.3.1.1Integer32 (0..19)read-writecurrent
h3cDHCPRIfToGroupRowStatus
OBJECT-TYPE
Operation status of this table entry. Three actions are used: active, createAndGo, destroy
1.3.6.1.4.1.43.45.1.10.2.58.1.3.1.2RowStatusread-createcurrent
h3cDHCPRAddrCheckTable
OBJECT-TYPE
A table containing the states of dhcp security address check switchs for interfaces.
1.3.6.1.4.1.43.45.1.10.2.58.1.4not-accessiblecurrent
h3cDHCPRAddrCheckEntry
OBJECT-TYPE
An entry containing the state of dhcp security address check switch for an interface.
1.3.6.1.4.1.43.45.1.10.2.58.1.4.1not-accessiblecurrent
h3cDHCPRAddrCheckSwitch
OBJECT-TYPE
The state of dhcp security address check switch for this interface. It has two defined values: enabled and disabled. If the value is enabled, the address check function would be enabled. The default value is disabled.
1.3.6.1.4.1.43.45.1.10.2.58.1.4.1.1INTEGER {enabled(1), disabled(2)}read-writecurrent
h3cDHCPRSecurityTable
OBJECT-TYPE
A table containing the information of DHCP security.
1.3.6.1.4.1.43.45.1.10.2.58.1.5not-accessiblecurrent
h3cDHCPRSecurityEntry
OBJECT-TYPE
An entry containing the information of DHCP security.
1.3.6.1.4.1.43.45.1.10.2.58.1.5.1not-accessiblecurrent
h3cDHCPRSecurityClientIpAddrType
OBJECT-TYPE
DHCP client's net ip address type
1.3.6.1.4.1.43.45.1.10.2.58.1.5.1.1InetAddressTypenot-accessiblecurrent
h3cDHCPRSecurityClientIpAddr
OBJECT-TYPE
DHCP client's net ip address
1.3.6.1.4.1.43.45.1.10.2.58.1.5.1.2InetAddress (SIZE(1..64))not-accessiblecurrent
h3cDHCPRSecurityClientMacAddr
OBJECT-TYPE
DHCP client's mac address
1.3.6.1.4.1.43.45.1.10.2.58.1.5.1.3MacAddressread-writecurrent
h3cDHCPRSecurityClientProperty
OBJECT-TYPE
Property of client address
1.3.6.1.4.1.43.45.1.10.2.58.1.5.1.4INTEGER {static(1), dynamic(2)}read-writecurrent
h3cDHCPRSecurityClientRowStatus
OBJECT-TYPE
Operation status of this table entry. Three actions are used: active, createAndGo, destroy
1.3.6.1.4.1.43.45.1.10.2.58.1.5.1.5RowStatusread-createcurrent
h3cDHCPRStatisticsGroup
OBJECT-IDENTITY
1.3.6.1.4.1.43.45.1.10.2.58.1.6
h3cDHCPRRxClientPktNum
OBJECT-TYPE
The total number of the packets received from DHCP clients by DHCP relay.
1.3.6.1.4.1.43.45.1.10.2.58.1.6.1Unsigned32read-onlycurrent
h3cDHCPRTxClientPktNum
OBJECT-TYPE
The total number of the brodcast packets transmitted to DHCP clients by DHCP relay.
1.3.6.1.4.1.43.45.1.10.2.58.1.6.2Unsigned32read-onlycurrent
h3cDHCPRRxServerPktNum
OBJECT-TYPE
The total number of the packets received from DHCP Servers by DHCP relay.
1.3.6.1.4.1.43.45.1.10.2.58.1.6.3Unsigned32read-onlycurrent
h3cDHCPRTxServerPktNum
OBJECT-TYPE
The total number of the packets transmitted to DHCP Servers by DHCP relay.
1.3.6.1.4.1.43.45.1.10.2.58.1.6.4Unsigned32read-onlycurrent
h3cDHCPRDiscoverPktNum
OBJECT-TYPE
The total number of the DHCP Discover packets handled by DHCP relay.
1.3.6.1.4.1.43.45.1.10.2.58.1.6.5Unsigned32read-onlycurrent
h3cDHCPRRequestPktNum
OBJECT-TYPE
The total number of the DHCP Request packets handled by DHCP relay.
1.3.6.1.4.1.43.45.1.10.2.58.1.6.6Unsigned32read-onlycurrent
h3cDHCPRDeclinePktNum
OBJECT-TYPE
The total number of the DHCP Decline packets handled by DHCP relay.
1.3.6.1.4.1.43.45.1.10.2.58.1.6.7Unsigned32read-onlycurrent
h3cDHCPRReleasePktNum
OBJECT-TYPE
The total number of the DHCP Release packets handled by DHCP relay.
1.3.6.1.4.1.43.45.1.10.2.58.1.6.8Unsigned32read-onlycurrent
h3cDHCPRInformPktNum
OBJECT-TYPE
The total number of the DHCP Inform packets handled by DHCP relay.
1.3.6.1.4.1.43.45.1.10.2.58.1.6.9Unsigned32read-onlycurrent
h3cDHCPROfferPktNum
OBJECT-TYPE
The total number of the DHCP Offer packets handled by DHCP relay.
1.3.6.1.4.1.43.45.1.10.2.58.1.6.10Unsigned32read-onlycurrent
h3cDHCPRAckPktNum
OBJECT-TYPE
The total number of the DHCP Ack packets handled by DHCP relay.
1.3.6.1.4.1.43.45.1.10.2.58.1.6.11Unsigned32read-onlycurrent
h3cDHCPRNakPktNum
OBJECT-TYPE
The total number of the DHCP Nak packets handled by DHCP relay.
1.3.6.1.4.1.43.45.1.10.2.58.1.6.12Unsigned32read-onlycurrent
h3cDHCPRStatisticsReset
OBJECT-TYPE
This node only supports set operation. If the value is true,it will clear all of the packet statistics.
1.3.6.1.4.1.43.45.1.10.2.58.1.6.13TruthValueread-writecurrent
h3cDHCPRCycleGroup
OBJECT-IDENTITY
1.3.6.1.4.1.43.45.1.10.2.58.1.7
h3cDHCPRCycleStatus
OBJECT-TYPE
If the value is on, the cycle function would be enabled.
1.3.6.1.4.1.43.45.1.10.2.58.1.7.1INTEGER {on(1), off(2)}read-writecurrent
h3cDHCPRConfigOption82Group
OBJECT-IDENTITY
1.3.6.1.4.1.43.45.1.10.2.58.1.8
h3cDHCPROption82Switch
OBJECT-TYPE
If the value is enabled, DHCP relay supporting option 82 function would be enabled.
1.3.6.1.4.1.43.45.1.10.2.58.1.8.1INTEGER {enabled(1), disabled(2)}read-writecurrent
h3cDHCPROption82HandleStrategy
OBJECT-TYPE
The strategies of DHCP relay handling option 82. 'drop' indicates DHCP relay discarding the request packet including option 82. 'keep' indicates DHCP relay accepting the request packet without any change of the option 82. 'replace' indicates DHCP relay accepting the request packet on condition that it generates a new option 82 to replace the original one.
1.3.6.1.4.1.43.45.1.10.2.58.1.8.2INTEGER {drop(1), keep(2), replace(3)}read-writecurrent
h3cDHCPRConfigOption82IfTable
OBJECT-TYPE
A table containing the information of DHCP option 82. This table depends on h3cDHCPRIfToGroupTable. An entry of this table will be created when an entry of h3cDHCPRIfToGroupTable is created.
1.3.6.1.4.1.43.45.1.10.2.58.1.8.3not-accessiblecurrent
h3cDHCPRConfigOption82IfEntry
OBJECT-TYPE
An entry containing the information of DHCP option 82.
1.3.6.1.4.1.43.45.1.10.2.58.1.8.3.1not-accessiblecurrent
h3cDHCPROption82IfSwitch
OBJECT-TYPE
If DHCP relay supports option 82 functions, the value is 'enabled'. If DHCP relay does not support option 82 functions, the value is 'disabled'.
1.3.6.1.4.1.43.45.1.10.2.58.1.8.3.1.1INTEGER {enabled(1), disabled(2)}read-writecurrent
h3cDHCPROption82IfStrategy
OBJECT-TYPE
The strategies of DHCP relay handling option 82. 'drop' indicates DHCP relay discarding the request packet including option 82. 'keep' indicates DHCP relay accepting the request packet without any change of the option 82. 'replace' indicates DHCP relay accepting the request packet on condition that it generates a new option 82 to replace the original one.
1.3.6.1.4.1.43.45.1.10.2.58.1.8.3.1.2INTEGER {drop(1), keep(2), replace(3)}read-writecurrent
h3cDHCPROption82IfFormat
OBJECT-TYPE
The format of DHCP relay option 82. 'normal' is the standard format. 'verbose' is the detailed format.
1.3.6.1.4.1.43.45.1.10.2.58.1.8.3.1.3INTEGER {normal(1), verbose(2)}read-writecurrent
h3cDHCPROption82IfNodeType
OBJECT-TYPE
Property of DHCP relay option 82 verbose format. The value can be set by user only when the value of h3cDHCPROption82IfFormat is set with 'verbose'. If the value of h3cDHCPROption82IfFormat is 'normal', the value is automatically set with 'invalid'. the value can not be set with 'invalid' by user. 'mac' indicates the option 82 verbose format is filled in with the mac of DHCP relay input interface. If the value of h3cDHCPROption82IfFormat is set with 'verbose', the value is automatically set with 'mac'. 'sysname' indicates the option 82 verbose format is filled in with the name of the DHCP relay. 'userdefine' indicates the option 82 verbose format is filled in with the string defined by user. If the value is set with 'userdefine', the value of h3cDHCPROption82IfUsrDefString must be set simultaneously.
1.3.6.1.4.1.43.45.1.10.2.58.1.8.3.1.4INTEGER {invalid(1), mac(2), sysname(3), userdefine(4)}read-writecurrent
h3cDHCPROption82IfUsrDefString
OBJECT-TYPE
The string defined by user to fill in the option 82 verbose format. If the value of h3cDHCPROption82IfFormat is 'normal', or the value of h3cDHCPROption82IfNodeType is 'mac' or 'sysname', it is set with a null string automatically and can not be modified by user. It must be set with a non-zero length string when the value of h3cDHCPROption82IfNodeType is set with 'userdefine'.
1.3.6.1.4.1.43.45.1.10.2.58.1.8.3.1.5OCTET STRING (SIZE(0..256))read-writecurrent